Detailed Product Description

condom Testing process:

Air Inflation Test: This test is carried out on a daily basis and the purpose is to measure the elasticity and strength of the condoms. Samples are selected from each batch of our produced condoms and filled with air until it blows up to three foot high and one foot wide (bursting points = 40litres of air)

Hole Test: Samples are filled up with water (approximately 300 ml) and suspended for 2 minutes. After that we roll them on blotting paper to determine for the minute fluid leakage. If more than small number displaying flaw are found, then the entire batch is rejected.

Electricity Test: All of our condoms are 100% electrically tested. This test is used to check for the possible microscopic holes in our condoms one more time before they are packaged.  Each condom sample are stretched over a metal former and electrified with high voltage. Any breakdown of the film is measured and any tiny flaw, even one that is too small to be detected by the human eye, would result in rejection.

Other Tests: Samples are also checked for size and thickness; are tested for physical strength, artificially aged at accelerated temperatures as an assurance of the quality of their product life in later years and etc. 

3pieces/pack, 48packs/box, 48boxes/carton

Small box: 90*70

Medium box: 145*145*90

Carton box: 605*455*380

Gross weight: 28kg

Net weight: 26kg